Ličio baterijų krovimo modulis 1A Micro USB TP4056

Specification:

• Charging Method: linear charge
• Charging Current: 1A Adjustable
• Charge Accuracy: 1.5%
• Input Voltage: 4.5V-5.5V
• Full Charge Voltage: 4.2V
• Charging Indicator: Blue light  lit charge,red light lit full charge
• Charging Input Interface: Micro  USB
• Working Temperature: -10 Degree to +85 Degree
• Reverse: NO
• Weight: 1.8g
• External Dimensions: 25 * 19 * 10mm
• Usage: Used for single lipo or multi-section lipo parallel charging,can take power from the USB port.

Current regulation:

Features:

• Use mature charging chip TP4056,simple peripheral circuits,good protection performance and high charging accuracy.
• Fully machinery automated processing,all patch parts manufacturing.
• Each module will be tested before shipment,high reliability.
• Current can be adjusted,just change the circuit board fixed resistors, can change the output to the 100mA-1000mA, very convenient.

Note:

• Input reverse connection has no effect on the chip, but the output (battery end) reverse connection will burn out the chip.
• Ampere meter can only be series connected to the 5V input end.
• The charging current is best to be 0.37 times of the battery capacity,
• Charging wire can't be too thin or too long.
• Make sure the board has good contact with the battery.
• Chip at work about 60 degrees fever is normal.