LED srovės stabilizatorius 6-11V max +17V 700mA APC-8-700

Features:

• Constant current design
• Universal AC input / full range
• Class II power unit, no FG
• Fully isolated plastic case
• IP42 design
• Small and compact size
• Cooling: free air convection
• Protection: short circuit
• No load power consumption of <0.5W
• 100% full load burn-in test
• Low cost / high reliability
• Applications:
  • Indoor LED lighting
  • LED decorative lighting
  • LED office lighting

Specification:

• Output:
  • Rated current: 700 mA
  • Operating voltage: 6-11 V
  • Rated power: 7.7 W
  • Ripple & noise (max.): 250 mVp-p
  • No load output voltage: 17 V
  • Current accuracy: ± 8 %
  • Setup, rise time: 500 ms, 180 ms / 230 VAC 3000 ms, 150 ms / 115 VAC at full load
  • Hold up time: 20 ms / 230 VAC at full load
• Input:
  • Voltage range: 90-264 V~ 127-370 VDC
  • Frequency range: 47 - 63 Hz
  • Efficiency (typ.): 80 %
  • AC current: 0.15 A / 230 VAC; 0.3 A /1 15 VAC
  • Inrush current (typ.): cold start 70 A (twidth = 120 µs measured at 50 % Ipeak) at 230 VAC
  • Leakage current: 0.25 mA / 240 V~
• Protection:
  • Short circuit: hiccup mode, recovers automatically after fault condition is removed
• Environment:
  • Operating temperature: -30 to +70 °C
  • Operating humidity: 20-90 % RH non-condensing
  • Storage: -40 to +80 °C, 10-95 % RH
  • Temperature coefficient: +/- 0.2 % / °C (0-45 °C)
  • Vibration: 10-500 Hz, 2G 10 min/1 cycle, period for 60 min each along X, Y, Z axes
• Safety & EMC:
  • Safety standards: UL8750, CSA-C22.2 No. 250.0-08 approved; design refer to EN60950-1, EN61347-1, EN61347-2-13
  • Withstand voltage: input to output: 3.75 kVAC
  • Isolation resistance: input to output: > 100 Mohm / 500 VDC / 25 °C / 70 % RH
  • EMC emission: compliance to EN55022, EN61000-3-2 Class A, EN61000-3-3
  • EMC immunity: compliance to EN55024, EN61000-4-2,3,4,5,6,8,11; light industry level (surge 2 KV), criteria A