TP4056 1A Rechargeable Charging Board Charger Module Micro USB
*Ši nuotrauka skirta tik susipažinimui su produktu. Tikrasis produktas gali skirtis nuo nuotraukos.
Specification:
- Charging Method: linear charge
- Charging Current: 1A Adjustable
- Charge Accuracy: 1.5%
- Input Voltage: 4.5V-5.5V
- Full Charge Voltage: 4.2V
- Charging Indicator: Blue light lit charge,red light lit full charge
- Charging Input Interface: Micro USB
- Working Temperature: -10 Degree to +85 Degree
- Reverse: NO
- Weight: 1.8g
- External Dimensions: 25 * 19 * 10mm
- Usage: Used for single lipo or multi-section lipo parallel charging,can take power from the USB port.
Current regulation:
|
R(K) |
I(mA) |
|
30 |
50 |
|
20 |
70 |
|
10 |
130 |
|
5 |
250 |
|
4 |
300 |
|
3 |
400 |
|
2 |
580 |
|
1.66 |
690 |
|
1.5 |
780 |
|
1.33 |
900 |
|
1.2 |
1000 |
Features:
- Use mature charging chip TP4056,simple peripheral circuits,good protection performance and high charging accuracy.
- Fully machinery automated processing,all patch parts manufacturing.
- Each module will be tested before shipment,high reliability.
- Current can be adjusted,just change the circuit board fixed resistors, can change the output to the 100mA-1000mA, very convenient.
Note:
- Input reverse connection has no effect on the chip, but the output (battery end) reverse connection will burn out the chip.
- Ampere meter can only be series connected to the 5V input end.
- The charging current is best to be 0.37 times of the battery capacity,
- Charging wire can't be too thin or too long.
- Make sure the board has good contact with the battery.
- Chip at work about 60 degrees fever is normal.
- Product Code: P-TP4056MIK
- Out Of Stock
-
Price:
2.00€
with TAX
