Digital Multimeter KEW 1011 KYORITSU

DC V: 600.0mV/6.000/60.00/600.0/600V (Input Impedance: 10MΩ, 100MΩ only 600mV) ±0.5%±2dgt (600.0mV/6.000/60.00/600.0V) ±0.8%±3dgt (600V)
AC V: 6.000/60.00/600.0/600V (Input Impedance: 10MΩ) ±1.0%±3dgt (6.000/60.00/600.0V)±1.5%±3dgt (600V)
DC A: 600/6000µA/60/600mA/6/10A ±1.2%±3dgt (600/6000µA/60/600mA) ±2.0%±5dgt (6/10A)
AC A: 600/6000µA/60/600mA/6/10A ±1.5%±4dgt (600/6000µA/60/600mA) ±2.2%±5dgt (6/10A) Ω     600Ω/6/60/600kΩ/6/60MΩ ±1.0%±2dgt (600Ω/6/60/600kΩ/6MΩ) ±2.0%±3dgt (60MΩ)
Continuity buzzer: 0 - 600Ω (Buzzer sounds below 100Ω)
Diode test: 2.8V Release Voltage:Approx. 0.4mA Test Current
Capacitance: 40/400nF/4/40/400/4000µF
Frequency: 10/100/1000Hz/10/100/1000kHz/10MHz
DUTY: 0.1 - 99.9% (Pulse width/Pulse period) ±2.0%±2dgt (- 10kHz)
Temperature: -50 - 300ºC (-58 - 572ºF) (with the use of Temperature probe 8216)
Note: KEW 1011 can measure max. 700ºC
In order to measure over 300ºC, please use a K-type temperature probe available in the market.
Applicable standards: IEC 61010-1 CAT III 300V Pollution degree 2; IEC 61010-1 CAT II 600V Pollution degree 2; IEC 61010-031; IEC 61326
Display: 6040 Counts
Power source: R6 (1.5V) × 2 (Auto-power-OFF within 15 minutes)
Dimensions: 161(L) × 82(W) × 50(D)mm
Included Accessories: 7066A (Test leads); 8216 (K-type Temperature probe); 0.8A/600V (Ceramic Fuse) × 1built-in: 10A/600V (Ceramic Fuse) × 1built-in: R6 × 2Instruction Manual
Optional Accessories: 7234 (Crocodile clip test lead); 9095 (Carrying case)