Smoke detector 3xAA
*Ši nuotrauka skirta tik susipažinimui su produktu. Tikrasis produktas gali skirtis nuo nuotraukos.
ATTENTION !!! In order to maintain the smooth operation of the device, the device should undergo regular maintenance and be regularly tested!
SELECTION SYSTEM
In order to ensure maximum protection, we recommend installing the device in all areas and on every level of a residential building (both where there are equipment or installations that may constitute a potential source of fire, but also in other rooms).
THE FITNESS EQUIPMENT
The average lifetime of the device (the electronic sensor) is about 5 years. This time is closely depends on the environmental conditions in which the device worked, date of manufacture, the amount of activation alarm, etc.) It is recommended that regular replacement of worn-out models with new ones.
RELATED INFORMATION SECURITY
To minimize the risks associated with fire regularly (at least once every six months) to commission qualified personnel to check the heating system, ventilation system, chimneys and fumes from fuel-powered devices. All heating appliances should always be installed in accordance with the manufacturer's instructions and adhere to local building codes. All equipment should be be installed and checked by experts after installation. Should be regularly tested pipe joints fuel supply or exhaust discharge, for any leaks, cracks, rust, etc. It is essential to read the entire household to alarm devices used in the system.
ALARM ACTIVATION
At the start of the alarm:
- smoky MANDATORY TO LEAVE THE ROOM WHERE THE ALARM launched
- Contact the Fire Department or the Police
- If you notice any symptoms of toxicity (eg. headache) at home or any member of the household, it is essential to contact a doctor
- In the event of a false alarm, you should verify the installation and the choice of installation
FEATURES
- High quality photoelectric sensor
- Signaling alarm sound and optical indicator
- Built-in electronics unit testing and verifying the proper operation of the device and reset the device in alarm.
- Signaling the need to replace the battery (beep periodically repeated at regular intervals - about 40 seconds)
- Power Saving Function
- High efficiency operation
SPECIFICATIONS
- Power supply: 1 battery 9V DC
- Sensor Type: photoelectric
- Power consumption during standby:> 10uA
- Power consumption during alarm:> 10mA
- Volume:> 80 dB
- Ambient temperature: -100C ~ 500C
- Permissible ambient humidity: 10% ~ 90% RH
- Product Code: B-XD10
- Out Of Stock
-
Price:
10.00€
with TAX
