Protek 1006 Handheld Oscilloscope

• 60MHz Bandwidth with 2 Channels
• Rise Time 5.8ns
• Real Sampling Rate: 150Msa/s
• Equivalent-Time Sampling Rate: 50Gsa/s
• 6,600 Count DMM resolution with AC/DC  at 600V, 10A
• Large 5.7 inch TFT Color LCD Display
• USB Host/Device 2.0 full-speed interface connectivity
• Multi-Languages Support
• Battery Power Operation (Installed)

Specifications Vertical Channels 2 Bandwidth 60MHz Rise Time 5.8ns Input Impedance Resistance: 1M, Capacitance: 15pF Input Sensitivity 10mV/div to5V/div Input Coupling AC, DC with Groud Level Indicator Vertical Resolution 8 bits Memory Depth 32k at Signal Channel, 16k at Dual Channel Maximum Input 300V (AC + DC Peak) Horizontal Sampling Real-Time Sampling Rate:150MSa/s Equivalent-Time Sampling Rate:50GSa/s Time Base Range 5ns/div~1000s/div Time Base Precision ±50ppm Trigger Source CH1, CH2,  Mode Edge, Pulse Width, Alternative X-Y Mode X-Axis Input Channel 1 Y-Axis Input Channel 2 Phrase Shift Max. 3 Degrees Cursors and Measurement Voltage Measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot Time Measurement Frequency, Rise Time, Positive Width, Negative Width, Duty Cycle Delay Measurement Delay 1 -> 2 ,Delay 1 -> 2 Cursors Measurements Manual, Track, Auto Measure Modes Waveform Signal Process CH1+/-CH2, CH1xCH2, CH1/CH2, FFT, Invert Storage 15 Waveforms and Setups Meter Mode Maximum Resolution 6,600 Count DMM Testing Modes Voltage, Current, Resistance, Capacitance, Diode and Continuity Maximum Input Voltage AC: 600V, DC: 600V Maximum Input Current AC: 10A, DC: 10A Input Impedance 10 10MΩ Display TFT LCD Type 5.7 Inch with LED Backlight Display Display Resolution 240 (Vertical) x 320 (Horizontal)Dots Interface USB USB Host / Device 2.0 Full Speed Supported Optional RS232, LAN Power Source Line Voltage Range AC 100V ~ 240V, 50Hz ~ 60Hz; DC Input: 8.5VDC, 1500mA Battery Power (Installed) 6 Hours Li-Ion Battery Mechanics Dimensions 9.65 x 5.9 x 2.05ins (245 x 150 x 52mm) Weight 2.65lbs (1.2Kgs) Other GND Reference Oscilloscope and Multimeter Independence